The manufacturer of rail type ship loader will take you to know what factors can judge the normal operation of portal crane

Rail shiploader manufacturers take you to know what factors can judge the normal use of the gantry crane: we all know that the installation of a gantry crane is very complicated and troublesome, so every time after the installation, you need to start the trial, only after the trial machine has been successfully installed, and the function is normal, you can really enter the life cycle To judge whether the machine can be used normally, we can see the following points.

First of all, it is very important to observe the oil flow, whether there is oil leakage in the motor, oil pipe, lubricating parts and bearings of the machine, and whether there is oil leakage in the sealing parts, so as to ensure that the sealing performance of the machine is intact. This is a very basic point. At the same time, it is relatively easy to observe whether there is oil leakage.

Secondly, we need to observe the belt of gantry crane in operation. If we want to put it into production and use formally, we must ensure that the belt runs smoothly and smoothly. There should be no deviation, overturning, slipping, blocking and other phenomena in the process. If there is any, we must check and replace the belt immediately.

Only by paying attention to these situations can the portal crane be better installed, and can the power and effect of the equipment be effectively brought into play when it is officially used, without various accidents and other problems due to the lack of inspection.